Dismantling: Dismantling the ETA cartridge
Loosen and remove nut (
1
) with a 10mm fixed spanner.
The ETA cartridge (5) has been sealed through machining and cannot be overhauled. In the
case of faults or a malfunctioning, this cartridge must be replaced.
Dismantling: Removing the seals
Prize the dust seal (
1
) off its seat with a small flat-tip screwdriver.
Take great care not to damage the internal surfaces of the one-piece assembly while
removing the dust seal.
With the same screwdriver, prize off the metal stop ring (
2
).
Take great care not to damage the internal surfaces of the one-piece assembly while
removing the stop ring.
© Marzocchi Suspension
2005
-
Z1 FR 1
