Z1
C
R
REASSEMBLY
CAUTION:
before reassembling,
all metal components should be
washed carefully with inflammable and
biodegradable solvent and dried with
compressed air.
GUIDE BUSHING AND SEAL
ASSEMBLY
FIG. 13
Check that no dirt or debris is between
slider and bushing. Insert the guide bush-
ing (23) into place so that it adheres to the
slider.
23
24
25
B
FIG. 14
Fit the upper washer (24) into the slider so
that it touches the guide bushing.
FIG. 15
Lubricate the oil seal (25) and place it onto
the seal press (B) with the hollow side
toward the slider.
Press the oil seal into place until it touches
the upper washer by using the above seal
press.
