Shiver
SC
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
▲
DISASSEMBLY
GENERAL
– The reference numbers given in this section relate to the components shown in the forks exploded view.
– Before starting any operation, please read the diagram below. It shows the quickest procedure and the exact sequence in which it should
be disassembled. Locate the part you need to remove in the diagram, then look at the arrows to determine which other parts you will
need to remove first.
DISASSEMBLY DIAGRAM
SPRING CHANGE
PRELOAD KNOB FIG. 2
OUTER SLIDER CAP FIG. 4/5
SLEEVE AND SPRING FIG. 6
FORK OIL CHANGE
STOP RING FIG. 3
“LOCK” KNOB FIG. 1 (left leg)
FOOT NUT FIG. 7
PILOT BUSHING AND
SEAL ASSEMBLY CHANGE
DUST SEAL FIG. 9
STOP RING FIG. 10
OIL SEAL, UPPER WASHER
AND GUIDE BUSHINGS FIG.11-12
COMPLETE HYDRAULIC CARTRIDGE FIG. 8
HYDRAULIC CARTRIDGE CHANGE
