MXR
Air
17
16
34
30
33
3
14
A
4
VALVE ASSEMBLY CHANGE
FIG. 14 (only left leg)
To check that the valve assembly is operat-
ing correctly, it is necessary to work on the
inside of the stanchion tube.
Slip off the stop ring
(17)
using pointed
pliers.
Pull the valve assembly
out of the tube with
one finger in the same sequence as in the
figure: covering
(33)
, valve
(34)
rebound
spring
(30)
and washer
(16)
.
FIG. 13 (only left leg)
Remove the stop ring
(4)
from pumping
element bottom
(14)
with a small flat screw-
driver.
Mark stop ring seat into inner rod for proper
fitting.
Use the same screwdriver to remove the
ring
(A)
and screw inner rod until adjuster
threaded end is disengaged from pumping
element.
Remove inner rod and replace O-ring
(3)
if
damaged.
