Assembling: Reassembling the steering crown unit / arch-slider assembly
A special spanner shall be used to assemble the bottom nuts. Do not, at any times, use other
tools.
Fit both dust seals (
11
) to the stanchions.
Insert the crown-stanchion unit (
3
) in the arch-slider assembly (
4
).
Insert the complete ETA cartridge (
9
) in the left leg.
Using the special 12mm spanner (
A
), tighten the bottom nuts (
1
) complete with O-rings (
2
) of both legs
to the recommended tightening torque (
10 Nm ± 1
).
© Marzocchi Suspension
2005
-
MX Comp ETA