M
A
R
A
T
H
O
N
D
32
D
D1
C
C
Pos. 3: “Minimum rebound
damping”
Turn the knob completely clockwise until
hearing the last click. In this position the fork
will have fast rebound damping for
downhilling.
IMPORTANT:
do not force the adjuster
knob
(28)
past its limit.
NEGATIVE AIR CARTRIDGE ADJUST-
MENT (LH fork leg – valve is
located in the center of the cap)
Pump air into the valve, as indicated, to set
COMPRESSION damping. To change the
pressure inside the fork legs, remove the
protection cap
(32)
(LH fork leg) and
depressurize the leg by pushing lightly on
valve pin. Fully tighten adapter fitting
(D)
,
supplied with the fork, on
M
ARZOCCHI
pump
(C)
. Screw fitting end –with O-ring
(D1)
on
valve, and pressurize until the required
value is reached. The higher the pressure in
the LH cartridge, the more sensitive the fork
will be and vice versa.
Unscrew the fitting/pump assembly and
refit the cap
(32)
.
IMPORTANT:
inflate using the special
M
ARZOCCHI
pump with the proper
pressure gauge. Use of improper tools or
other procedures than specified ones
might lead to improper inflating.
NOTE:
in case of air leakage when adapter
fitting
(D)
is installed, be sure that the O-
ring
(D1)
is not damaged.
28
1
3
2
