Fit the rebound adjusting knob (
6
) to the right leg.
Take great care not to damage the O-ring fitted to the end of the pumping element rod.
Tighten the fixing screw (
5
) of the adjusting knob to the recommended tightening torque (
2 Nm ± 0.5
).
Using the special 12mm key (
A
), tighten the bottom nut of the right leg (
7
) complete with O-ring (
8
) to
the recommended torque (
10 Nm ± 1
).
Fit the TAS adjustment knob (
16
) to the left leg.
Be careful not to damage the O-ring at the end of the pumping rod.
Tighten the fixing screw of knob (
16
) to the recommended torque (
2 Nm ± 0.5
).
Using introducer (
A
) insert the dust seals (
11
) in their seats.
© Marzocchi Suspension
2005
-
Marathon XC