Super T
QR20
FIG. B
Assemble the fork to the frame complete
with headset. Fit the upper crown
(1)
into
the stanchions and the steer tube.
1
FIG. C
The stanchions edge
(28)
must be aligned
with or slightly lower than the upper crown
(1)
.
If fork legs overprotrude, fit some spacers
(C)
to the plate close to the steer tube.
1
C
28
FIG. D
Fit the handlebar support and the A-Head
Set cap over the upper crown
(1)
and then
adjust the steering.
Now finally tighten the 3 bolts
(11)
on the
upper crown to 11 Nm.
WARNING:
Loosen the 3 screws
(11)
on the upper crown before
adjusting the steering. Tighten the above
bolts to the specified torque when finished.
11
1
Nm
11
