Super T
QR20
26
25
REASSEMBLY
CAUTION:
before reassembling, all metal
components should be washed carefully
with inflammable and biodegradable sol-
vent and dried with compressed air.
GUIDE BUSHING AND SEAL
ASSEMBLY
FIG. 14
Check that no dirt or debris is between
slider and bushing. Insert the guide bushing
(26)
into place so that it adheres to the
slider.
FIG. 15
Fit the upper washer
(25)
into the slider so
that it touches the guide bushing.
FIG. 16
Lubricate the oil seal
(24)
and place it onto
the seal press
(B)
with the hollow side
toward the slider.
Press the oil seal into place until it touches
the lower washer by using the above seal
press.
24
B
