Dirt
Jumper
1,5
QR20
20
19
15
14
13
15
14
13
40
39
35
16
(110)
(130)
FIG. 16
Insert the stop ring
(20)
into the slider
making sure it is properly seated into place.
Use buffer
(B)
to properly seat the ring into
the slider.
FIG. 17
Lubricate the dust seals
(19)
and fit them
into the stanchions from the spring end.
VALVE AND PUMPING ROD
ASSEMBLY
FIG. 18 (right pumping element only)
After having overhauled or replaced the
valve unit and after having cleaned the
inside of the tube, reassemble.
Assemble valve components, in correct se-
quence: washer
(16)
,
rebound spring
(35)
,
valve
(39)
and pocket
(40)
.
Then fit seal ring
(13)
on pumping element
(14)
.
In pumping element fitted to forks with a
travel of 130
, only fit
one
rebound
spring
(15)
, or
two
rebound springs
(15)
for a
travel of 110
.
Insert the complete pumping element in the
valve assembly.
