Marzocchi BOMBER 2005, Owner'S Manual

Page: 42 / 59

Summarizing tables
M
Z
024
English
6
130
Table 6.5: Dirt Jumper Series
Rider’s weight
kg
lbs
55 - 70
120 - 155
70 - 80
155 - 180
bar
psi
0 - 1,00
0 - 15
80 - 95
180 - 210
95 - 110+
210 - 220+
Preload air pressure
(both legs)
Dirt Jumper 1 Dirt Jumper 2 Dirt Jumper 3
Dirt Jumper 1
Preload spring with air – Both legs
Remove protection cap.
Fully tighten the pump adapter on the valve and inflate air to the required
pressure.
Mount the protection cap.
Dirt Jumper 2
Rebound adjustment with internal register – Right leg
Using a small pointed object fully deflate the right leg pressure.
Fully unscrew and remove the cap using a 21 mm Allen key.
Insert the supplied hexagon rod into the stanchion tube, making sure to center
the adjustment seat.
When turning the adjuster counterclockwise, you will increase the rebound
hydraulic braking, making the fork slower during the rebound phase.
When turning the adjuster clockwise, you will decrease the rebound hydraulic
braking, making the fork more responsive during the rebound phase.
After adjustment has been made, put the cap back to its seat and tighten it to
the required torque (10±1 Nm).
Inflate to the suggested pressure.
Rebound adjustment with external register – Right leg
When turning the adjuster clockwise, you increase the rebound hydraulic
braking, making the fork slower during the rebound phase.
When turning the adjuster counterclockwise, you decrease the rebound
hydraulic braking, making the fork more responsive during the rebound phase.
100 - 120 Dirt Jumper 1
Dirt Jumper 2
Dirt Jumper 3
100
** ø20 mm through hole axle available as option
* the 8” brake system installation is allowed using an adapter provided by the brake system manufacturer
100 - 130
ø 20 mm through hole axle
ø 20 mm through hole axle
STD **
INTL STD 6" *
INTL STD 6" *
INTL STD 6" *
NO
NO
NO
T
V
Dirt Jumper
32 mm 2,8" x 26"