Installation
M
Z
024
English
3
108
3.4.4 Wheel installation on Shiver series
forks
For correct fork function, please follow the
instructions here below when installing the
wheel:
• Insert the wheel axle (
7A
) through the right
wheel axle clamp, the wheel and the left
wheel axle clamp.
• Using a 6 mm Allen key, screw down the bolt
(
7B
) on the left side and tighten to the
required torque (
15±1 Nm
).
• Check the correct fork-wheel alignment, by
fully compressing the fork a few times. The
wheel should not make contact with or come
close to any portion of the fork. Lift the front
of the bicycle and spin the wheel a few times
to verify the correct alignment with the disk
brake. Check the owners manual for the
brake system for the proper specifications.
• Tighten the screws (
7C
) positioned on both
wheel axle clamps, using a 5 mm Allen key to
the required torque (
10±1 Nm
), with the
sequence 1-2-1.
Picture 7 -
Wheel
installation on Shiver series forks
6 mm
15±1 Nm
5 mm
10±1 Nm
7A
7C
7B
M
Z
0
2400
7
Summary of Contents for BOMBER 2005
