22
5. Setting up the autonomous robots
The steps below describe setting up the system with Marvelmind Autonomous Robots.
Notice that Marvelmind Autonomous Delivery Robots support Inverse Architecture
How to launch:
5.1. Set up the
Marvelmind Indoor “GPS” system. It’s detailed described in the
5.2. Configurate paths and start/end points.
5.3. Reset the modem and connect it to the network.
5.4. Wait for 30 seconds after connecting (keep the modem and antenna vertically).
5.5. Position the robot on the driving zone/path.
5.6. Press the blue button (go to point 2 - end point).
5.7. After arrival at end point press the black button (go to point 1 - start point)
