background image

NOTE

!

CAUTION

Important Safety Instructions

Warnings and safety instructions appearing in this guide 

are not meant to cover all possible conditions and situa-

tions that may occur. Common sense, caution, and care 

must be exercised when installing, maintaining, or operat

-

ing this appliance.

Recognize Safety Symbols, 

Words, and Labels.

CAUTION-

Hazards or unsafe practices which could re-

sult in personal injury or property / product damage.

NOTE-

Important information to help assure a problem 

free installation and operation.

!

WARNING

WARNING - 

You can be killed or seriously injured 

if you do not follow these instructions.

!

WARNING

State of California Proposition 65 Warning:

This product contains one or more chemicals known 

to the State of California to cause cancer.

!

WARNING

State of California Proposition 65 Warning:

This product contains one or more chemicals known 

to the State of California to cause birth defects or 

other reproductive harm.

!

WARNING

WARNING - 

This unit contains R600a (Isobutane) 

which is a flammable hydrocarbon. It is safe for regular 

use. Do not use sharp objects to expedite defrosting. 

Do not damage refrigerant circuit.

IMPORTANT SAFETY INSTRUCTIONS

Summary of Contents for MLWD224


























Reviews: