MAR7000
1
1/2013, P/N 01757 Rev. B
Overview
The MAR7000 is a
controller and sensors
in a
single, attractive package that creates a flexible
solution to stand-alone control challenges or
BACnet network challenges. Temperature,
humidity, and motion sensing are standard.
Flexible input and output configurations
and built-in programming ensure that a
variety of application needs can be met:
◆
Heat pump unit, with up to two
compressor stages, and with op-
tional auxiliary heat, emergency
heat, dehumidification, and/or
fan status
◆
A/C, with up to two H/C stages,
and with optional economizer,
dehumidification, and/or fan
status
Features
Interface and Function
◆
User-friendly English-language menus (no obscure numeric codes) on a 64 x
128 pixel, dot-matrix LCD display with 5 buttons for data selection and entry
◆
Built-in, factory-tested libraries of configurable application control sequences
◆
Integral energy management control with deadband heating and cooling set-
points and other advanced features
◆
Schedules can easily be set uniquely by entire week (Mon.–Sun.), week-
days (Mon.–Fri.), weekend (Sat.–Sun.), individual days, and/or holidays—or
“learned” automatically via motion sensing
◆
Six On/Off and independent heating and cooling setpoint periods are available
per day
◆
Three levels of password-protected access (user/operator/administrator) pre-
vent disruption of operation and configuration
◆
Integral temperature, humidity, motion, and CO
2
sensor options
◆
A 72-hour power (capacitor) backup and a real-time clock for network time
synchronization or full stand-alone operation
BACnet Standards
◆
Meets or exceeds BACnet AAC specifications in the ANSI/ASHRAE BACnet
Standard 135-2008
MAR7000
Thermostat/Controller
Specifications and design subject to change without notice.
