— 12 —
Assembly Instructions
1.
Install a rubber packing onto one of the 1 inch hose fittings. Slide a hose fitting nut over the fitting. Slide
two hose clamps over the suction hose. Attach the hose coupler assembly and strainer to either end and
tighten the hose clamps.
Due to different operator requirements, the discharge hose is not provided. Three hose fittings and the
one touch coupler are supplied with water pump to be used with either 5/8, 3/4 or 1 inch inside diameter
hose. Select an discharge hose that is the suitable diameter and length for your application.
Once you have selected the outlet hose, assemble the appropriate hose fitting, packing and not and secure
the fitting to the hose with the hose clamp.
STRAINER
CLAMP
SUCTION HOSE
CLAMP
COUPLING
PACKING
NUT
Suction Hose Assembly (1 inch Hose Fitting)
Discharge Hose Assembly (One Touch Coupler)
DISCHARGE HOSE
CLAMP
ONE TOUCH COUPLER