background image

English

| 

1

 |

Limited Warranty Statement

All Maruyama commercial/ industrial products are warranted to the original purchaser to be free from defects 
in material and workmanship from the date of purchase for the time periods listed as follows:

Lifetime

 for solid steel driveshaft and ignition coils.

5 years

 for qualified IRON 5-YR™ commercial, institutional, or industrial use.

1 year

 for residential or 2 years for commercial use with competitor’s oil.

90 days

 for rental use.

Engine - Refer to engine manufacturer’s warranty statement. Only Maruyama engines are
covered by this limited warranty statement.

Any part of a Maruyama product found to be defective within the applicable warranty period shall, at 
Maruyama's option, be repaired or replaced without charge.  Warranty consideration is obtained by deliver-
ing any Maruyama product believed to be defective to an Authorized Maruyama Servicing Dealer within the 
applicable warranty period. 
The purchaser shall not be charged for diagnostic labor that leads to the determination that a warranted part 
is defective, if the diagnostic work is performed at a Maruyama Dealer. 
Any warranted part which is not scheduled for replacement as required maintenance, or which is scheduled 
only for regular inspection to the effect of "repair or replace as necessary" shall be warranted for the warranty 
period. Any warranted part, which is scheduled for replacement as, required maintenance shall be warranted 
for the period of time up to the first scheduled replacement point for that part. Maruyama Mfg. Co., Inc. is lia-
ble for damages to other engine components caused by the failure of a warranted part still under warranty. 
The purchaser is responsible for the performance of the required maintenance, as defined by Maruyama 
Mfg. Co., Inc. in the Owner's/Operator's Manual.

EMISSION-RELATED PARTS WARRANTY

: In addition to the above warranty coverage, Maruyama Mfg. 

Co., Inc. will repair or replace, free of charge, for the original purchaser and each subsequent purchaser any 
emission-related part or parts found to be defective in material and workmanship for two (2) years from origi-
nal retail delivery date except catalytic converter. Catalytic converter is warranted one year from origi-
nal retail delivery date. Emission-related parts are the carburetor assembly, the ignition coil 
assembly, the ignition rotor and the spark plug and catalytic converter.

  Any replacement part that is 

equivalent in performance and durability may be used in non-warranty maintenance or repairs, and shall not 
reduce the warranty obligations of Maruyama Mfg. Co., Inc.

Effective June 1, 2000

Summary of Contents for H23DF









































































Reviews: