Connecting Stop Switch Wires
1
Stop Switch Wires
�'
Stop Switch Wires�
Throttle Cable.�
Knob
Air Filter Cover
Install the plastic tube (packed with the d1ive shaft
assembly) a10und the throttle cable and stop
switch wires
2 Plug the stop switch wi1es into the matching con
necto1s f
r
om the engine .. Note that wire polarity is
not impmtant
Connecting Throttle Cable
1
�
Carburetor Bracket ./
<___
Cable Adjuster
---=----:----:::----:-::--7---..
Sleeve
Throttle Stop/Idle Speed
Adjuster Screw Bracket
Carburetor Throttle Cam
J
Idle Speed
Adjuster Screw
Loosen the knob and remove the air filte, cover,
inse1t the thrnttle cable through the cable adjuster
sleeve on the carburetor bracket. Make sure the
end of the cable housing is seated positively in the
sleeve
2 Position the slotted fitting on the carburetor so the
1ecessed hole for the cable lug is away from the
cable adjuster sleeve
3.
Rotate the carburetm throttle cam clockwise and
slip the throttle cable through the slot in the slot
ted fitting, making sure the cable lug d10ps into
the 1ecessed hole.
4 Operate the thrnttle t1igge1 a few times to make
sure that it w01ks correctly
5
Adjust the cable adjuste1 sleeve so the stop on the
ca1bureto1 thrnttle cam just contacts the thrnttle
stop when the tlnottle trigge1 is fully dep1essed.
l
