manualshive.com logo in svg

MARUTI SUZUKI Omni E 8 STR BS-IV, Owner'S Manual, Page: 9 / 96

Share
Download
MARUTI SUZUKI Omni E 8 STR BS-IV Owner'S Manual Download Page 9

9

797-74E-I

Omni MPI

Maruti Suzuki  offers the Emission Warranty on all Maruti Suzuki  vehicles (aparts from the Regular Warranty and will run parallel to the
regular product warranty) only in four metropolitan cities 

(New Delhi, Kolkatta, Mumbai and Chennai)

 with effect from 

July 1st, 2001.

Terms:

The Emission Warranty will be applicable for 

80,000 kms or 3 years

 (Whichever comes earlier) from the date of delivery to the first

owner. The remaining warranty terms will be valid in case of any change in ownership provided the production of all valid documents.

Conditions :

1.

Under Emission Warranty, Warranty claims will be admitted for a prima facie examination, in case vehicle fails to meet to the
Emission Standard as specified 

in sub rule (2) of rule no. 115 of Central Motor Vehicles Rules (CMVR), 1989

.

2.

The warranty claims will only be accepted after examination carried out by Maruti Suzuki  or it’s dealer which leads to firm conclusions
that the

a) Original settings have not been tempered in any case.

b) Part (as given in Annexure-A) has a manufacturing defect.

c) Vehicle is unable to meet the Emission Standards (as given in 1.), inspite of the vehicle having been maintained and used

in accordance with the instructions as specified in Owner’s Manual and Service Booklet and the used fuel and different oils
(Engine oil, Transmission oil, Brake oil etc.) are also as per specification.

3.

The method of examination for deciding the warranty of the parts will be at the sole discretion of Maruti Suzuki  and it’s dealer and
results of the examination will be final and binding. If after examination, the warrantable condition is not established, Maruti Suzuki
and it’s dealer has the right to charge all, or part of the cost of such examination.

4.

Under Emission Warranty, the parts (as given in Annexure-A) will be changed free of cost, but the consumables will be charged
as per actual.

5.

If the part covered under Emission Warranty or the associated parts, are not independently replaceable, on account of these
being integral parts of a complete assembly, Maruti Suzuki  and it’s dealer will have the sole discretion to replace either the entire
assembly or by using some of the parts of the system through suitable repairs or modifications.

2-3

EMISSION WARRANTY

Summary of Contents for Omni E 8 STR BS-IV

































































































Reviews:

No comments