52
MARUTI 800 DOMESTIC
844-74E
6-7
OTHER CONTROLS AND EQUIPMENT
TYRE CHANGING TOOLS
The jack, wheel wrench and jack handle are
stowed in the luggage compartment behind
the rear seat.
To remove the jack, turn its shaft
counterclockwise and pull the jack out of the
storage bracket. To stow the jack, place it
in the storage bracket and turn the shaft
clockwise until the jack is securely held in
place.
The jack should be used only to
change wheels. It is important to read
the jacking instructions in the
EMERGENCY SERVICE section of this
manual before attempting to use the
jack.
After using the jack, jack handle, and
wheel wrench, be sure to stow them
securely or they can cause injury if an
accident occurs.
w
w
w
w
w
WARNING
w
w
w
w
w
WARNING
HIGH MOUNT STOP LAMP
(if equipped)
High mount stop lamp is provided with your
vehicle and is fitted on back door. The stop
lamp will glow as when the brake pedal will
be depressed.
To change the bulb of the stop lamp,
remove the clips at both sides of the cover,
by pressing the inner pin inside so that the
clip gets loose and remove the bulb on
turning it anticlock-wise.
The rating of bulb is 16W/12V. There are
one bulb in high mount stop lamp.
844-06-016
844-06-017
844-06-018
Summary of Contents for 800
