MARUTI SUZUKI 800, Owner'S Manual

Page: 40 / 120

40
MARUTI 800 DOMESTIC
844-74E
INSTRUMENT PANEL
5-9
Description of Controls
Function selector 1 : This selector is used
to select one of the functions described
below:
DEFROST & VENTILATION
2
:
Temperature-controlled air comes
out of the center and side outlets
of instrument panel, windshield
defroster outlet and side defroster
outlets.
VENTILATION 3 : Temperature-
controlled air comes out of the
center and side air outlets.
BI-LEVEL 4 : Temperature-
controlled air comes out of the
floor outlets and cooler air comes
out of the center and side outlets.
When the temperature control
lever is in the fully “COOL”
position or fully “HOT” position,
however, the air from the floor
outlets and the air from the center
and side outlets will be the same
temperature.
HEAT 5 : Temperature-controlled
air comes out of the floor outlets.
HEAT & DEFROST 6 : Temp-
erature-controlled air comes out
of the floor outlets, the
windscreen defroster outlets, and
the side defroster outlets.
DEFROST
7
: Temperature-
controlled air comes out of the
windscreen defroster outlets and
the side defroster outlets.
Air Intake Lever
8
: This lever is used to
select between circulating outside air
(FRESH AIR) or recirculating inside air
(RECIRCULATED AIR).
Temperature Control Dial 9 : This dial is
used to control the temperature of the air
that comes out of the air outlets.
Fan switch
0
: This switch is used to turn
on the fan and to select fan speed. There
are four positions: OFF, LOW, MEDIUM and
HIGH.
Natural Ventilation
Move the function selector to
“VENTILATION”, the air intake lever to
“FRESH AIR”, The temperature control dial
to the desired temperature position, and the
fan switch to “OFF”. Fresh air will flow
through the vehicle when it is moving.
SYSTEM OPERATING INSTRUCTIONS
844-05-020
844-05-026
844-05-021
844-05-022
844-05-023
844-05-025
844-05-024