Martinsound MonitorMAX, User Manual, Page: 8 / 14

Press the
Exit key twice to return to operation mode.
Turn the Monitor knob and select, Dim. This sets the amount of level attenuation of the Monitor
speakers when the Dim switch is engaged. Turn the Monitor knob while holding the Enter key to
change this level to a minimum of –1dB and maximum of 30dB. This same function can be
accessed from the operation screen by holding the
Dim key and turning the Monitor knob.
Mon SPL
Press the Enter key and turn the Monitor knob to get to the Mon Interfaces page. Turn the
Monitor knob to select the first item, “SPL Display Range”. This setting is used in conjunction
with the SPL calibration procedure (see Calibration/Outputs). It sets the SPL display range
(minimum and maximum) for the Monitor level control. This setting has no electrical function
other than to change the display reference. The actual change takes place when the speaker
trims are adjusted so that the SPL measured matches the MonitorMax display. Pressing the
Enter key will toggle through the 5 possible range selections of 25-85dB, 30-90dB, 35-95dB, 40-
100dB, and 45-105dB. The factory default range is 40-100 dB.
Turn the Monitor knob to select “SPL Reference Tic”. The only function of this feature is to move
the reference Tic on the Monitor bar meter on the MonitorMax LCD. Turn the Monitor knob while
holding the Enter key to increase or decrease the setting to a minimum of 25 and a maximum of
105. The Tic will reflect changes of the SPL Display Range and will disappear at extreme
settings. The factory default is 85dB.
Turn the Monitor knob to select “SPL Default”. This sets the user preferred level for the Monitor
control when MonitorMax is powered up. Turn the Monitor knob while holding the Enter key to
change the level from the minimum to maximum setting allowable within the currently selected
SPL Display Range. The factory default setting is 50. Press
Exit to return to operation mode.
Cue SPL
8