MartinLogan MONTAGE User Manual Download Page 13

System Frequency Response

47–20,000 Hz ± 3 dB

Sensitivity

90 dB/2.83 volts/meter

Impedance

5 ohms

Crossover Frequency

2500 Hz

Components

Air core coils, metal film and low dissipation electrolytic
capacitors

Woofer/Mid-Range Drivers

2 x 6.5” (16.5cm) high rigidity aluminum cones with
extended throw drive assembly, non-resonance asymmetri-
cal chamber format; bass reflex

High Frequency Driver

1.5" x 2.25" (3.8cm x 5.7cm) ATF Transducer

Power Handling

150 watts rms

Weight

30 lbs. each (13.6 kg)

Size

9.44” W × 11.69” D × 38” H
(24cm W × 29.7cm D × 96.5cm H)

Serial Number

The serial numbers for your new Montage loudspeakers are
located on the bottom of the speakers.

Your Montage speaker is provided with an automatic Limited
90 Day Warranty coverage.

You have the option, at no additional charge, to receive a
Limited 5 Year Warranty coverage. To obtain the Limited
5 Year Warranty coverage you need to complete and return
the Certificate of Registration, included with your speakers,
and provide a copy of your dealer receipt, to MartinLogan
within 30 days of purchase.

For your convenience MartinLogan also offers online warranty
registration at www.martinlogan.com.

MartinLogan may not honor warranty service claims unless
we have a completed Warranty Registration on file!

If you did not receive a Certificate of Registration with your
new Montage speaker, you cannot be assured of having
received new units. If this is the case, please contact your
authorized MartinLogan dealer.

Service

Should you be using your MartinLogan product in a country
other than the one in which it was originally purchased,
we ask that you note the following:

1 The appointed MartinLogan distributor for any given

country is responsible for warranty servicing only on
units distributed by or through it in that country in
accordance with its applicable warranty.

2 Should a MartinLogan product require servicing in a

country other than the one in which it was originally
purchased, the end user may seek to have repairs per-
formed by the nearest MartinLogan distributor, subject
to that distributor’s local servicing policies, but all cost
of repairs (parts, labor, transportation) must be born by
the owner of the MartinLogan product.

3 If, after owning your speakers for six months,

you  relocate to a country other than the one in
which you purchased your speakers, your warranty
may be transferable. Contact MartinLogan for details.

General Information     13

G

ENERAL

I

NFORMATION

Warranty and Registration

Specifications

Summary of Contents for MONTAGE

















Reviews: