Martinelli NAVETTA ELITE, Manual

Page: 14 / 24

14
manufacturer since it is an integral part of the Navetta Elite
and the safety system. If replacing it, use an official spare
part.
• The design of the Navetta Elite features a polystyrene
shock absorption device built directly into the shell,
below the padding: do not remove it.
• This product is only suitable for children who are unable
to sit up by themselves.
• This product is designed for children from birth up to a
weight of 9 kg. When used in vehicles it is designed for
weights of up to 10 kg.
• During use in vehicles, always fasten the safety harness.
When using the product as a carriage, remove the
harness and place it in the special pocket.
• Only use the product on surfaces that are hard,
horizontal and dry.
• Do not leave other children playing unattended near the
carriage.
• Take care when adjusting the mechanisms (handle,
backrest) with the child present.
• Regularly check the handle (or the handles) and the
bottom of the carriage to make sure that there are no
signs of breakage or damage.
• When using the carriage with a stand, check the
maximum length of the carriage specified on the stand.
• When using the pram with a Martinelli stand, check the
maximum pram length allowed on the stand.
• The pram is intended for transportation purposes and
should not replace the cot at home.
• In the bassinet, the baby's head must never be lower
than its body.
• Do not use this product after 7 years from the date
of production indicated on the structure. The natural
ageing of the materials may mean that it is no longer
compliant with standards.
• Do not add any mattress are not approved by the
manufacturer.
The images referring to the textile details may differ
from the collection purchased.
Instructions for use
Using the Navetta Elite
1 HOOD: to lift the hood completely, pull it until it clicks.
2 To lower the hood, press down on the upper part of
same and, at the same time, lower it.
3 The hood comes with a mesh insert so that the baby can
be seen from any position. Pull the zippers as shown in
the picture and pull the hood further, to reveal the mesh
insert.
4 FOOT MUFF: to secure it correctly:
Unfasten the hood button.
Position the foot muff in the bassinet.
5 Button the foot muff following the sequence as
illustrated.
The foot muff in the figure is properly attached.
6 Fasten the straps as illustrated.
7 The straps can be used to fasten the foot muff to the
hood, so as to protect the child even more against the
elements. Unfasten the sides of the foot muff (arrow_a),
unfold it upwards (arrow_b) and fasten it to the hood
with the straps (arrow_c);
8 CARRY HANDLE: this is built into the hood. To carry the
bassinet, lift the hood (if lowered) until it clicks and hold
the handle placed above it.
• Before lifting the bassinet, ensure the built-in hood is
correctly fastened.
• Before lifting the bassinet, make sure the hood is in the
correct position for transport.
• Before unfastening and lifting the bassinet from the
frame, adjust the backrest to its lowest position (figure
11).
9 ROCKING POSITION: The base of the Navetta Elite has a
special shape which allows you to rock the child when it
is placed on a flat surface.
10 COT POSITION: It is possible to make the Navetta Elite into
a non-rocking cot by opening out the two legs under the
base.
11 ADJUSTING THE BACKREST and THE FOOTREST: with the
COMFORT SYSTEM, backrest and footrest can be adjusted
simultaneously. Pull the knob outwards (fig_a) while
turning it (fig_b) to raise or lower the backrest and the