Martin Stage Cyclo, User Manual

Page: 15 / 36

Stand-alone operation 15
DIP-switch settings in stand-alone mode
Stand-alone operation settings
Activating colors
DIP switch pins 1 to 4 each activate a color in the stand-alone program.
Setting program speed
Combinations of DIP switch pins 5 and 6 allow one of four different speeds
to be set.
Fading between colors
If DIP switch 7 is set to OFF (blackout fading), colors fade to almost
blackout before the next color fades in.
If DIP switch 7 is set to ON (crossfading), color fading overlaps. If two or
more colors are active, one color fades in while another is fading out, giving
a color mixing effect. For example, if red and blue are activated and
crossfading is selected, colors will crossfade from red through purple to
Pin Function
1 White active
2 Red active
3 Green active
4 Blue active
5 & 6 Program speed
Pin 6 Pin 5 Speed
OFF OFF 1 sec. steps (fastest setting)
OFF ON 5 sec. steps
ON OFF 10 sec. steps
ON ON 30 sec. steps (slowest setting)
7 OFF = Blackout fading, ON = Crossfading
8 OFF = Run program, ON = Pause program
9 OFF = Master, ON = Slave (Note: do not set more than one fixture as master)
10 ON = Stand-alone mode.