Service manual
9 of 15
P3 PowerPort 1000 IP Install - Revision A, 10-26-2017
Figure 15: Disconnecting ribbon cable
Figure 16: Display panel
Figure 17: Display panel, Rental version
Replacing the display panel
1. Follow the procedure in “Opening the lid” on page
6.
2.
Disconnect the ribbon cable (1), by gently lifting
the black lock (2) on PL15 with your fingers.
3. Remove the ribbon cable.
4.
Remove the new display panel (P/N 5070865)
from the bag.
5.
Gently remove the display panel (3) using a
plastic screwdriver. See fi
to fi
NOTE! On P3 PowerPort Install, both the cabinet
and the display panel are grey. However, on
P3 PowerPort Rental, both the cabinet and the
display panel are black.
1
2
3