background image

Do not store or use gasoline or other flammable 

vapors and liquids in the vicinity of this or any 

other appliance.

WHAT TO DO IF YOU SMELL GAS:

* Do not try to light any appliance.

* Do not touch any electrical switch; do not

   use any phone in your building.

* Immediately call your gas supplier from a

   neighbor's phone. Follow the gas supplier's

   instructions.

* If you cannot reach your gas supplier, call

   the fire department.

Installation and service must be performed by

a qualified installer, service agency or the gas

supplier.

This Appliance may be installed in an aftermarket, 

permanently  located,  manufactured  home  (USA 

only)  or  mobile  home,  where  not  prohibited  by 

local codes.

This appliance is  only  for use  with

the   type  of  gas  indicated   on  the

rating  plate.  This  appliance  is  not

convertible for use with other gases.

WARNING: If the information in these instructions 

are not followed exactly, a fire or explosion may 

result causing property damage, personal injury, 

loss of life.

INSTALLER: 

Leave this manual with 

the appliance.

CONSUMER: 

Retain this manual for

future reference.

OWNER’S INSTALLATION, SAFETY

AND OPERATIONS MANUAL

GRAVITY VENTED WALL FURNACE SERIES: MDV8P, MDV8N, MDV12P, MDV12VP, 

MDV12N, MDV12VN, MDV20P, MDV20VP, MDV20N, MDV20VN

Your heater may differ from models shown.

We thank you for purchasing our quality and reliable 

MARTIN    

heater. If you require assistance or have 

any questions about safety, installation, operation, require replacement parts, safety label or manual, please

contact our customer service:
Call us toll-free at  1-800-266-1414  Monday to Friday 8H AM to 17 H PM

Or email us at  [email protected]   www.bismar.com

Bismar Inc., 9, de Montgolfier st., Boucherville, Qc, J4B 8C4 

®

V1-6.2016

Conforms to ANSI STD Z21.86-2008

and certified to CSA STD 2.32-2008 (R2014), and CGA 2.17-M91 (R2009)

0544GH001S

Summary of Contents for MDV12N




















Reviews: