Service manual
21 of 27
MAC Aura XB - Revision A, 05-15-2017
Figure 40: Removing the base cover
Figure 41: Lifting the covers
Base
Replacing the base fan
1.
Remove the four TX20 screws (1) underneath the
base and remove the base cover.
Figure 42: Connector for the fan wire
2. Lift the two covers a little bit and draw them gently
away from each other.
3. Be careful when you pull the two cover parts from
each other as the connector for the fan wire is
connected to the PSU PCB (3).
4.
Disconnect the connector (4) before you pull away
the cover.
1
1
4
3