© Martin Engineering GmbH
14
M3776UK-05/10
Installing controller
4.3.1
Changing parameters
The time variables are deposited as parameters in the controller. These can
be changed as described in the following:
DANGER
!
Dangerous electric voltage! Different component parts in the
controller are served by dangerous electric voltages. You can suffer
severe electric shocks by coming into contact with these. Please be
particularly careful when working on the open controller.
1. Open the controller.
2. Press (OK) on the operator device in order to call up the main menu.
3. Press the down arrow keys until the „PARAMETER“ menu entry is
marked.
4. Press (OK) to call up the parameter.
5. Mark the desired parameter using the down arrow key.
Figure 6: Controller operator device
Figure 7: Selection of the parameter
Figure 8: Changing parameter
