![background image](http://html1.mh-extra.com/html/martin/m2go-hd/m2go-hd_service-manual_1732566012.webp)
Service manual
12 of 13
M1 HD - Revision A, 05-16-2017
Figure 22: Read the user manual
3. Lift up the cover at the top, right-hand corner and
away from the hinge.
4. Remove the plastic cover from the screen
assembly.
Updating software and OS
Update the software and OS according to the separate
installation procedures. You find the procedures on
martin.com.
You find the OS and M-Series software for your M1 HD
controller on
controllersupport.martin.com
.
Maintenance
Read the user manual before performing service or
maintenance on the product.
Failure to respect service and maintenance schedules
may cause damage that is not covered by product
warranties.
Cleaning the product
Do not use abrasive, caustic or solvent-based products
for cleaning, as they can cause surface damage.
•
Vacuum or gently blow away dust and loose
particles from the front panel with low-pressure
compressed air.
•
Remove any dust between the fader slots.
•
Vacuum or gently blow away dust and loose
particles from within the base assembly with low-
pressure compressed air.
•
Check the fan blades of the CPU fan and PSU
fan. Remove any dust build-up if needed and
make sure the fans can rotate gently. Never force
the rotation of the fans using compressed air.
•
Wipe the touch-screen with a soft, lint-free cloth.
Apply gentle pressure only.
•
Clean the touch screen on the front panel with a
soft, lint-free cloth.
Figure 23: Removing the plastic cover