10
Installation
4 If clamping, bolt the clamps securely to the flanges with grade 8.8 (minimum)
M12 bolts and lock nuts, or as recommended by the clamp manufacturer,
through the 13 mm holes. Install a safety cable that can hold at least 10 times
the weight of the fixture through one of the small holes and around the truss or
pipe. Remove a rubber washer if necessary to thread the safety cable.
5 Verify that the fixture is located at least 0.1 meters (4 in.) from any combustible
materials. Verify that the clearance around the fan and air vents is at least 0.1
meters (4 in.). Verify that there are no flammable materials nearby.
35000079B.fm Page 10 Thursday, December 9, 1999 11:47 AM
