Martin Ether2DMX, User Manual, Page: 9 / 21

Setup 9
T o c o n f i g u r e a D M X p o r t
1 Press MENU to enter setup mode.
2 Navigate to the menu for the desired DMX input or output port, for
example menu 4, “Set Output A Routing”, with the scroll wheel or arrow
keys. Press ENTER.
3 To activate the output, select “enable”, otherwise, select “disable”. Press
ENTER.
4 Scroll to the desired universe number. Note that the number is displayed
in 0-based hexadecimal.
5 Press ENTER to save the setting and return to the setup menu.
I P A D D R E S S
When used with the Maxxyz, the Ether2DMX Router must be given a
unique IP address - 2.0.0.5. Ensure that your Maxxyz controller is running
software version 1.04, or later.
For use with other Ethernet DMX controllers, consult the controller’s user
manual.
T o s e t t h e I P a d d r e s s
1 Press MENU to enter setup mode.
2 Navigate to menu 1, “Set IP Address”. Press ENTER.
3 Press the arrow keys as required to move the cursor to the first (left-most)
IP address field. Scroll to the desired value. (2 for Maxxyz)
4 Move the cursor to the second field. Scroll to the desired value. (0 for
Maxxyz)
5 Move the cursor to the third field. Scroll to the desired value. (0 for
Maxxyz)
6 Move the cursor to the fourth field. Scroll to the desired value. (5 for the
Maxxyz)
7 Press ENTER to save the setting. Press MENU to exit setup mode.