14
Ether2DMX Router user manual
status: a check mark to the right of the port letter indicates data
transmission through the port.
D M X R O U T I N G
The second status screen displays the DMX universe patched to each
DMX port.
E T H E R N E T A D D R E S S
The third screen displays the unit’s IP address, subnet mask, and a user-
definable ID number.
E T H E R N E T / D M X C O N V E R S I O N
In this application, the devices converts DMX to the ArtNet Ethernet
protocol and vice versa.
T o c o n v e r t E t h e r n e t t o D M X
1 Connect the Ether2DMX Router to the ArtNet Ethernet jack on the lighting
controller.
2 Connect the DMX data links to the DMX output jacks on the rear panel of
the Ether2DMX Router.
3 Configure the router’s IP address and subnet mask.
4 Enable the DMX outputs and patch them to DMX universes as desired.
T o c o n v e r t D M X t o E t h e r n e t
1 Connect the Ether2DMX Router to the ArtNet Ethernet jack on the lighting
controller.
2 Connect up to four DMX universes to the DMX inputs on the rear panel of
the Ether2DMX Router.
3 Configure the router’s IP address and subnet mask.
4 Enable the DMX inputs and patch each one to a unique DMX universe.
E T H E R N E T B R I D G E
Two Ether2DMX Routers can be connected to provide an Ethernet bridge
for 4 DMX universes. DMX input to the first unit is converted to Ethernet,
travels to second unit, and is converted back to DMX.