Installing control hardware
11
I
NSTALLING
CONTROL
HARDWARE
The AF-1 MkII™ and AF-2™ can be operated either using the Jem
multifunction remote control unit supplied with each machine, or via DMX
using a DMX control device and serial data link.
Remote control installation
To connect the remote control unit:
1. Power the fan off.
2. Plug the XLR connector on the remote control cable into the REMOTE
IN plug on the connections plate (see “
Connections panels
” on page
4).
3. Reapply power.
The AF-2 touring frame available as an accessory includes a docking
station for the remote control unit (see illustration below). The remote
control can be fastened in place using the two thumbscrews provided,
and the remote cable wrapped around the brackets.
DMX installation
Up to 32 devices can be controlled on one DMX data link. Devices must
be ‘daisy-chained’ in one continuous line without branches. More devices
can be added and the link can be branched using an optically isolated
splitter/amplifier such as the Martin RS-485 Opto-Splitter (P/N 90758060).
Summary of Contents for AF-1 MkII
