53D0427
15
NOTE: Clearance requirements
as detailed in “Clearances and
Height Requirements” section of
this manual must be met before
securing heater in place.
To prevent movement, the heater must be
secured to the floor or hearth.
1. Open the control access door and
remove the screen.
2. Remove log set.
3. To remove the grate and base assem-
bly, take out two screws as shown in
Figure 16.
4. Lift grate and base assembly out of the
firebox.
SECURING HEATER TO FLOOR
Lift grate and base assembly
using the grate only.
CAUTION
4. Secure the firebox with two anchoring screws
(
3
/
16
" x 1
1
/
4
" length) supplied with the fireplace
system.
See Figure 17 .
Note: If the unit is mounted on carpeting,
tile or combustible material without the
hearth, a metal or wooden base covering
the entire width and depth of the base must
be installed.
Figure 16 - Removing Grate and Base Assembly
Figure 17 - Securing Firebox to Floor or Hearth
Screws
f i r e - p a r t s . c o m