10
Half Fold Operation
To set the machine for half fold, you will need to take out the Back Fold Table,
reverse it, and re-insert it (closed end first) see Figure 11 below. Adjust the Front
Fold Table as described in step 3 above.
Automatic Feeding of Single Sheets
Follow the below steps for clean automatic paper feeding:
1. Square stack of up to 50 sheets of paper by tapping it on all sides on a flat surface
such as a table.
2. Load squared stack of paper into the
P7500 feed table, the top sheet of paper
should be in contact with the black feed
tire. NOTE: In loading the paper, the
stack need only be “pushed” into the
feed mechanism with a light touch.
Jamming the stack of paper into the
folder with force will result in feeding
problems. See figures 12 and 13.
Figure 12
Figure 11
1.
Take out back fold table
Lift up and pull out from
machine.
2.
Reverse Table. Knobs
should be facing up.
3.
Insert back into machine,
closed end first, knobs
still facing up.
Place stack of paper here.
