9
Control Panel:
Control panel options may vary depending on the model of the laminator; see figures
below for the control panel on your particular model
Control Panel
[a]
Temperature Readout
– displays set temperature of the laminator
[b]
Ready Indicator Light
– LED light would come on and remains completely illuminated when the
machine has reached the set laminating temperature.
[c]
Hot Button
– When pressed, the front top & bottom rollers’ temperature are set by default to 230F.
[d]
Temperature Control Buttons
– press the
▲
to increase the temperature; press
▼
to decrease the
temperature.
[e]
Cold Button
– When pressed or when machine is powered up, the “Cold” button would be set by
default to 32F.
[f]
Speed Readout
– By default, when the machine is powered up the display shows speed “5”.
[g]
Speed Control Buttons
– press the
▲
to increase the speed; press
▼
to decrease the speed; only on
the PRO model.
[h]
Measure Button
– when pressed and held down, the temperature display shows the ACTUAL
temperature of the machine at that given moment.
[i]
Run Button
– when pressed, initiates roller movement
[j]
Stop Button
– when pressed, stops the movement of the rollers.
[k]
Reverse Button
– must be when pressed and held on speed 5 or more, moves rollers in the reverse
direction; ensure the rollers have been stopped using the Stop Button prior to using the reverse button;
to use, press and hold to reverse roller direction; useful clearing wrap-arounds and for clearing film from
[a]
[b]
[d]
[f]
[h]
[i]
[g]
[k]
[e]
[i]
[C]
