7
Unpacking and Assembly…
•
Inspect shipping container and unit for signs of damage. Notify carrier and dealer
immediately
should any damage be noted.
•
Retain packaging in case you need to return the machine for repair.
•
This machine is big and bulky. Use two people when removing the machine from the
shipping container.
•
Place the laminator on a flat and stable surface that is capable of supporting the weight
of the machine.
•
Position the laminator so as to allow film exiting the machine to drop freely to the floor.
•
Connect power cord to an appropriate power source.
IMPORTANT SAFEGUARDS (Continued)
•
Do not operate the laminator with a damaged power supply cord or plug, or after it
malfunctions or has been damaged in any manner.
•
Keep the power cord away from hot or wet surfaces
•
Do not overload electrical outlets beyond their capacity as this can result in fire or
electrical shock.
This unit is rated at 15A and should be the only item plugged into a
15A.
When connected to a 20A branch, any items in addition to the Laminator must not
exceed 4A.
•
Adjust only those controls that are specified in these Operating Instructions.
INITIAL SETUP
