5
R
L
SPEAKER IMPEDANCE: MIN 4 -8
SINGLE SYSTEM
MIN 8 -16
DUAL SYSTEM
AC INPUT
FUSE
MUSIC
INPUT
MIC
OUT
AUX
OUTPUT
PRE
LINE
REC
INPUT
OUT
DISCONNECT POWER
SUPPLY CORD
BEFORE CHANGING
THE VOLTAGE
SPEAKERS
R
L
115V~ 5A 125V
115V~ 5A 125V
230V~ 2.5A 250V
230V~ 2.5A 250V
L
R
R
L
MUSIC POWER
INPUT VOLTAGE
T. H. D.
300 WATTS
AC 230V/115V
0.05%
LOW
HIGH
MIC A
MIC B
MIC INPUT
Pure Sound 11
Recording
This terminal connects to the speakers. Make sure polarity is correct connection.
3.SPEAKER
Use the speaker system of impedance 8 -16 ohm, when use speaker system 1
and 2 simultaneously.
This terminal outputs microphones' sound only from the amplifier without
8.MIC OUTPUT
echo effect.
The terminal use to connect sound source, Such as DVD. CDG. KOD or AUX etc.
7.MUSIC INPUT TERMINAL
Use this terminal when connecting external sound-effect devices such as
6.SOUND-EFFECT DEVICE INPUT/OUTPUT TERMINAL
graphic equalizer.
Use this terminal when recording amplifier output at tape deck or MP3 recorder.
5.RECORDING OUTPUT TERMINAL(REC)
This terminal connects amplifier output to the input terminal of external amplifier.
4.AUXILIARY OUTPUT TERMINAL(LINE)
1
3
3
2
4 5 6
6
8
9
7
10
10.DUAL VOLTAGE SELECTOR:
Before turn on power switch, be sure the AC voltage selector is
seted to the appropriate AC voltage according to your area.
1.POWER
2.FUSE:
The input voltage is 230V use 250V/2.5A Fuse
AC power input 230V/50Hz 115V/60Hz.
The input voltage is 115V use 250V/5A Fuse
9.REAR MIC INPUT JACKS:
These jacks are also for connecting microphones.
The MIC A is connected to the same circuit as theMIC 1 jack on the
front panel. And the MIC B is connected to the same circuit as the
MIC 2 jack on the front panel.
