6
Meter Settings
Default Settings
The Balemaster
is supplied ready
-
to
-
use with moisture descriptions, buzzer
tone and backlight on, auto
-
off time set at 2 minutes and temperature in °C.
To alter default settings
enter Settings Mode:
With the meter switched off, press and hold
and then press
. Hold both
buttons until the Settings Mode display shows and then release both buttons.
The screen will then scroll through the existing settings, showing each one for 2
seconds. If there is no key press within the 2 seconds it moves to the next setting:
Moisture range
descriptions ON
Buzzer Tone ON
Backlight ON
Auto Off time delay 2 mins
To set turn off time between 1
-
6
mins press and then press .
If set at 0, turn off is manual by
pressing and holding for 5 secs.
Temperature readings in °C
To change to °F, press and
then press
To change the settings above to OFF, press and then press
