XE300/XE500
User Guide V1.0
22
XE300/XE500
USER GUIDE
Loading XE300 Passive Presets
Loading presets for passive monitors is exactly the same procedure other than it being necessary
to define the preset for all four Inputs.
1. Connect the amplifier. The iK42 requires mains connected to its 32 Amp PowerCon
inlet, an input feed, either balanced analogue to the input XLRs, AES3 to the dedicated
AES XLR, or Dante to the Dante RJ45 port. XE300 in passive mode can be connected
directly to output Speakons 1, 2, 3 and 4. See “AC Power Connection” and “Audio
Connections” on page 15 for more details.
2. Power up the amplifier, once it has completed its power-up cycle press
INPUT and
press the down arrow once to show the Preset recall for Channel A:
3. Use the
ADJUST control to scroll round to the required XE300 Preset:
4. Press
ENTER and you will see the following screen:
Summary of Contents for XE300
