Copyright © 2021 Martin Audio Ltd.
47
SX SERIES USER GUIDE V2.5
SX SERIES USER GUIDE
WPSGRIDt
SXCF118
Remove the pins from the from SXCF118 to release the links.
Rotate the SXCF118 links and line them up with the pin holes
in the WPSGRIDt.
Replace the pins to link and lock the SXCF118 securely to the
WPSGRIDt.
Using one or two motors position a WPSGRIDt above the
SCXF118 and lower it onto the enclosure.
Raise the WPSGRIDt and SXCF118 to a height suitable to fit
another SXCF118 below the array, lower it making sure the
protective nylon skids line up and fit into the recessed channels
on the SXCF118 below.
Remove the pins from the stow position, rotate the links to line
up with the pin hole position on the SXCF118 above.
Replace the pins into the lock position on the cabinet above
making sure all four links are securely attached.
Repeat the procedure for each sub to be included in the array to a maximum of 16 SXCF118. For arrays that consist of SXCF118 and
WPS, please refer to the WPS manual.
