6 8-16
Omniline
®
module wall mounting
To remind you:
Martin Audio Omniline® loudspeakers must be installed by experienced
loudspeaker installation personnel using the full installation kit provided
It is the installer’s responsibility to ensure that all relevant local, national and
international electrical, fire and building safety regulations are complied with
Every Omniline® loudspeaker must be fitted with a steel safety wire this can
be fitted between an attachment bracket (provided) and a suitable supporting
structure.
7.1
1)
Prepare your blocks of four OmniLine® modules to the splay angles
recommended by the OmniLine® software
– see section 5.2 earlier.
2)
Add link plates to the lower module of the upper 4-module blocks using the
link plate bolts and lock nuts supplied with each four OmniLine® modules –
see kit picture at the beginning of this document.
Fit link plates (supplied with each four modules)
to the bottom of each block of four
3)
Fit 4-module blocks together by interlocking modules together near the front.
All material © 2009. Martin Audio Ltd. Subject to change without notice.
16