![background image](http://html1.mh-extra.com/html/martin-audio/omniline-portable-speaker/omniline-portable-speaker_manual_1733081014.webp)
4-Omniline
®
module wall mounting
To remind you:
Martin Audio Omniline® loudspeakers must be installed by experienced
loudspeaker installation personnel using the full installation kit provided
It is the installer’s responsibility to ensure that all relevant local, national and
international electrical, fire and building safety regulations are complied with
Every Omniline® loudspeaker must be fitted with a steel safety wire this can
be fitted between an attachment bracket (provided) and a suitable supporting
structure.
6.1
Fit the U-bracket first – and then the linking pins.
Note that the recommended U-bracket position is on the second OmniLine unit from
the bottom of the arrays.
Its final orientation will be determined by the required linking pin positions – one way
round for 0-2 degrees, the other way round for 3-5 degrees.
U-bracket (shown positioned for 4 degree linking pin position)
All material © 2009. Martin Audio Ltd. Subject to change without notice.
13