10.
Line Level Output Socket
. When a processing module is fitted, left
and right sub bass signals can be routed to this output. See module
operating instructions for a full description.
11. and 12
Input Link Sockets.
3 pin male XLR connectors are provided
which are connected in parallel with the input sockets. These can be used
for "daisy chaining" the signal to other amplifiers.
Mains Voltage Selection
. The E1300 is dual voltage selectable; it is
normally supplied pre selected for 220/240 Volt AC operation only. For use
on 110/115 Volts AC, internal modifications must be made.
Warning: This modification should only be carried out by an
experienced service technician.
Contact Martin Audio Ltd or an appointed distributor for details.
Martin Audio – E1300 Amplifier
E
NGLISH
8
All material © 2007. Martin Audio Ltd. Subject to change without notice.
