Martin Audio CDD-LIVE! Series, User Manual

Page: 38 / 83

CDD ‐ LIVE USER GUIDE
CDD ‐ LIVE User Guide V1.0
37
…………
Vu ‐ Net
Vu ‐ Net is Martin Audio's proprietary application for control of monitoring of network controlled powered products. Introduced
as the control platform for the award winning Multicellular products MLA, MLA Compact and MLA Mini, a number of products
have been added to Martin Audios portfolio that can be incorporated into a single project and configured using Vu ‐ Net. CDD ‐
Live is the latest product to be integrated into the platform.
Basic operation is reasonably straightforward however it is beyond the scope of this User Guide to explain the finer points of the
software so for full operation guidelines please download the Vu ‐ Net User guide from www.martin ‐ audio.com/software . You
can also download the application from this location.
Introduction
Vu ‐ Net is the application used to connect to a U ‐ Net enabled device such as the multicellular family of products, the DD12, PSX,
CDD ‐ Live or Merlin processor. Connection to the cabinets is achieved either using the U ‐ Net network protocol, USB in the case
of the MLA Mini, DD12 and PSX and Ethernet for the CDD ‐ Live range. Vu ‐ Net is used to monitor and control the system, EQ
optimisations for multicellular arrays are uploaded from the program and cabinet firmware is checked and updated.
Before running Vu ‐ Net you need to make sure that all CDD ‐ Live cabinets have been connected to an Ethernet network using one
of the options shown in the System Wiring examples. Once this has been completed, you can run Vu ‐ Net.
When Vu ‐ Net opens you will see the following Window; ‐
This is a blank screen with only ‘New Project’ and ‘Open Project’ active prompting you to start by using one or the other. Start
by clicking on ‘New Vu ‐ Net project. You will see the following window; ‐