Martin Audio BlacklineX SERIES, User Manual

Page: 38 / 64

BlacklineX USER GUIDE
BlacklineX User Guide V1.0
37
…………
Use the Edit2 Control [8] to change the delay by:

±1.000 ms per click, or

±0.340 m per click, or

±1.115 feet per click
Use the Edit3 Control [9] to make fine adjustments.
The Edit3 Control changes the delay by:

±0.0208 ms per click, or

±0.007 m per click, or

±0.023 feet per click
Turning these Controls clockwise increases the delay time, while turning them anticlockwise decreases the delay time.
The minimum and maximum delay ranges from:

0.0000 ms – 600.9984 ms

0.000 m – 204.339 m

0.000 feet – 670.233 feet
Press the ESC button [11] to disengage Editing.
EQ Bypass
EQ Bypass flattens the 5 ‐ Band EQ on the input so you may hear exactly how it is affecting the system. By toggling the EQ Bypass
on and off, you may quickly compare the sound with and without EQ.
Turn the Edit2 [8] or Edit3 [9] Control to scroll between
Bypass = Off
[default] and
Bypass = On
.
Press the ESC button [11] to accept the new EQ Bypass mode and exit the EQ Bypass editing mode.
5 ‐ Band EQ
Editing input EQ on the DX0.5 is useful for adjusting the response of the entire PA, particularly when correcting anomalies caused
by venue acoustics. It is standard practice to use the input EQ for this function leaving the output EQ for any cabinet EQ
recommended by the system manufacturer.
Press the Enter button [10] to enter and edit the EQ bands. An arrow
–>
will appear next to
EQ
indicating that it is ready to be
edited.
Use the Nav/Edit1 [7] Control to change the frequency by ±1/24 octave per click. Turning this control clockwise increases the
frequency, while turning it anti ‐ clockwise decreases the frequency. The frequency ranges from 20.0 Hz to 20.0 kHz.
Use the Edit2 [8] Control to change the Q factor (bandwidth) by ±0.05 per click. Turning this Control clockwise increases the Q
factor, while turning it anticlockwise decreases the Q. The EQ band may be configured as high or low shelf by turning it all the
way anti ‐ clockwise.
These are the EQ choices from the furthest anticlockwise option to the furthest clockwise option:

–12 High Shelving

–6 High Shelving

–12 Low Shelving

–6 Low Shelving

0.05 – 3.00 [Parametric]
To change the EQ between shelving and parametric, the gain must first be set to 0.0 dB.
Use the Edit3 [9] Control to change the gain by ±0.5 dB per click. Turning this control clockwise increases the gain, while turning
it anti ‐ clockwise decreases the gain. The gain ranges from –15.0 dB to +15.0 dB.