background image

WARNINGS: LP TANK

CONNECTING HOSE ASSEMBLY TO 20LB. CYLINDER:

External threads

(type 1 ANSI Z21.81)

OPD triangular

handle

Fix hose 

assembly 

by rotating it 

clockwise

8

LEAK TESTING VALVES, HOSE AND REGULATOR

Leak test must be repeated each time LP thank is exchanged or refilled.

DO NOT smoke or have anything nerby that can easily ignite, such as lighters or matches.

DO NOT use an open flame to check for gas leaks.

Appliance must be leak checked outdoors in a well-ventilated area away from open flames

or sparks.

CONNECTING REGULATOR ASSEMBLY TO 1LB CYLINDER

1. Make sure all control knobs are in the OFF positions.

2. Inspect valve connections, port and regulator assembly. Look for any

damage  or  debris.  Remove  any  debris.  Inspect  hose  for  damage.

Never     attempt to use damaged or obstructed equipment. See your

local LP gas dealer     for repair.

3. Align the nozzle of the cylinder with the regulator and turn the cylinder

clockwise to tighten. Tighten firmly by hand only. The use of a tool will

damage the seal and cause a serious risk of gas leak.

4. Proceed to a leak test (see LEAK TESTING section).

1. Make sure cylinder valve is turned OFF

(turning clockwise).

2. Check cylinder valve to ensure it has proper external

male threads as illustration(type 1 ANSI Z21.81).

3. Make sure all burner valves are in the OFF

positions.

4. Inspect valve connections, port and regulator assembly. Look for any

damage or debris. Remove any debris. Inspect hose for damage.

Never attempt to use damaged or obstructed equipment.

See your local LP gas dealer for repair.

5. When connecting hose assembly to the cylinder valve, do so

manually, do not use a tool. Tighten firmly clockwise by hand

only. The use of a tool will Shut off gas supply by rotating valve

of gas cylinder clockwise. damage the seal and cause a serious

risk of gas leak.

6. SLOWLY - Open the cylinder valve fully. Proceed to a leak test (see LEAK TESTING section).

Turn off the gas supply by turning the gas cylinder 

valve clockwise.

Summary of Contents for MGP-22



















Reviews: