11
5. Refer to the above steps to replace another cutting line
(Fig. 19).
NOTE: There is a built-in line cutter that will cut and trim the
lines slightly longer than desired.
m
WARNING!
For optimal performance, use only
replacement cutting lines designed specifically for this electric
leaf m shredder (Model SDJ616L).
Monofilament lines having a maximum diameter of 0.1 in.
(2.5 mm) and a maximum length of 12.6 in. (320 mm) long may
be temporarily substituted, but this is NOT recommended.
Use of thicker lines, lines made of substitute material, or lines
greater than 12.6 in. (320 mm) long may result in permanent
damage to the motor and will void the manufacturer’s warranty.
Immediately replace any worn parts of the spinner head.
Storage
When storing the electric leaf m shredder at the end
of the season, disassemble the unit and stack the parts in the
following order (Fig. 20):
1. Place the funnel into the box.
2. Fit the motor bracket into the funnel.
3. Place the funnel cover onto the motor bracket.
4. Rest the legs in the box beside the funnel.
Service and Support
If your Martha Stewart
®
MTS-ELS13 electric leaf m
shredder requires service or maintenance, please call the
Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
Model and Serial Numbers
When contacting the company or reordering parts, you will
need to provide the model and serial numbers of your product.
These are found on the decal affixed to the housing or handle
of your electric leaf shredder. Copy these numbers into the
space provided below.
Fig. 19
Fig. 20
Record the following numbers from the housing or handle of your
new product:
Model #:
Serial #:
M T S - E L S 1 3
