Martha Stewart MTS-DTS13, Operator'S Manual

Page: 8 / 16

8
2. Secure the two middle handle bars to the lower handle
bars using the first set of knobs and bolts. Tighten the
knobs on each side to ensure a secure fit (Fig. 3).
3. Hang the extension cord restraint holder on the upper
handle (Fig. 4).
4. Connect the upper handle to the middle handle bars using
the second set of knobs and bolts. Tighten the knobs on
each side to ensure a secure fit (Figs. 4 & 5).
5. Fix the cord with cord clips to the middle and lower right
handle bars (Fig. 6).
Thatch Collection Bag Assembly
m
WARNING!
Do not attempt to use the product without
the thatch collection bag attached. This could pose a danger
of flying debris.
m
WARNING!
The product must be switched off and the
cutting device must have stopped rotating before you attach or
empty the thatch collection bag.
m
WARNING!
Never use the scarifier without the thatch
collection bag securely fitted.
NOTE: A full thatch collection bag will reduce the perfomance
of this product.
Attach the thatch collection bag to the lawn sca
dethatcher before operation.
1. Lift the thatch collection bag cover, and hang the thatch
collection bag to the mounting hooks (Fig. 7).
Fig. 3
Lower handle
knob + bolt
Middle handle bars
Lower handle bars
Fig. 4
Extension cord
restraint holder
Upper handle
Middle handle bar
Fig. 5
Upper handle
knob + bolt
Fig. 6
Cord clips
Mounting hooks
Fig. 7
Thatch collection
bag cover
Thatch collection bag